Worked example
A 120-inch 16:9 image is about 2.66 m wide. A lens rated 1.20–1.60:1 gives an estimated 3.19–4.25 m throw distance. Confirm the result with the model’s lens chart.
Estimate active image width and height from the screen diagonal, then work out lens-to-screen distance with the projector’s throw ratio.
A 120-inch 16:9 image is about 2.66 m wide. A lens rated 1.20–1.60:1 gives an estimated 3.19–4.25 m throw distance. Confirm the result with the model’s lens chart.
Use 16:9 for most widescreen video or check the slide canvas for 16:10 or 4:3. The calculator gives the active image rectangle. Ask for the assembled screen height, feet and any lower skirting separately so you can compare it with ceiling and stage clearance.
Enter the minimum and maximum ratios shown on the lens specification for your projector. If the proposed lens position falls outside the result, change the position or compare a different lens and recalculate. Confirm offsets, vertical clearance and permitted mounting position against the installation drawing before booking.
Measure from the projector lens to the active screen surface. Check the manual for exact reference points, lens offsets and mounting clearance.
The result gives image dimensions and a throw estimate. Brightness depends on rated output, image area, surface and room light. Test the actual content with the lights set for your event.