Fixed, pull-down or motorised

A fixed frame leaves the screen ready and occupies wall space full time. A pull-down can hide it in a shared room. Check flatness for your lens and confirm casing width, drop and mounting clearance. For a motorised screen, check power, controls, service access and what happens if the power is off.

Matte surfaces, gain, ALR and CLR

A matte surface is a starting point for wide seats with controlled light. A higher-gain material can favour some viewing positions over others. Check the sample from side seats. For ALR or ceiling-light-rejecting fabric, confirm the intended lens type, projector position and which direction the unwanted light comes from.

Specify both the picture and the frame

A 120-inch diagonal can refer to different widths and heights at 16:9 and 4:3. Put the actual width, height and aspect ratio on the order. For an existing wall fitting, confirm case or frame dimensions and the location of the lowest visible image edge.

Explore related options

Frequently asked questions

Do all ALR screens work with ultra-short-throw projectors?

Check the screen maker’s specification. Materials designed for projectors mounted farther back can behave differently with light arriving from below at a steep angle.

What fabric do I need for rear projection?

Use fabric rated for rear projection and confirm the available space for the lens, projector body and cables behind the screen. Ask whether the desired material is available for the size and frame.